- 1. Lucas Fuses (score: 1)
- Author: Ronald Olds <tr6@pipeline.com>
- Date: Tue, 07 Apr 1998 13:14:02 -0500
- Ron Olds
- /html/mgs/1998-04/msg00287.html (6,914 bytes)
- 2. Re: Lucas Fuses (score: 1)
- Author: Tyson Sherman <tsherman@tecinfo.com>
- Date: Tue, 07 Apr 1998 14:23:14 -0500
- blow at 35, so replace it with an american 35. -- Tyson Sherman http://www.tecinfo.com/~tsherman
- /html/mgs/1998-04/msg00288.html (7,384 bytes)
- 3. RE: Lucas Fuses (score: 1)
- Author: "Nunez, Eduardo" <Eduardo.Nunez@eng.ped.gmeds.com>
- Date: Tue, 7 Apr 1998 16:11:10 -0400
- Just some info that I've picked up over time. This is not a lesson on fuses, electrical system, cables, etc. Fuses are applied to protect the wiring assembly, not the electrical load. This means that
- /html/mgs/1998-04/msg00290.html (11,203 bytes)
- 4. RE: Lucas Fuses (score: 1)
- Author: "Nunez, Eduardo" <Eduardo.Nunez@eng.ped.gmeds.com>
- Date: Tue, 7 Apr 1998 16:32:28 -0400
- Something I forgot to add: The information below applies to modern fuses (Minifuses, ATO fuses, Maxifuses, Pacific or 'J-Case' fuses). Since I do not have information of glass type automotive fuses s
- /html/mgs/1998-04/msg00291.html (7,604 bytes)
- 5. Re: Lucas Fuses (score: 1)
- Author: Graham McCann <gmccann@pcug.org.au>
- Date: Wed, 08 Apr 1998 08:21:15 +1000
- Put a 35 amp fuse in and you will have a fuse containing "wire" thicker than some of the car's integral wiring. You can still get 35 amp blow, 17 amp continuous fuses but they are not that easy to fi
- /html/mgs/1998-04/msg00296.html (7,558 bytes)
- 6. Re: Lucas Fuses (score: 1)
- Author: JustBrits <JustBrits@aol.com>
- Date: Tue, 7 Apr 1998 20:04:55 EDT
- The fuses are a "dime-a-dozen" [well. not really!] at any legitamate auto parts store. Or I and any respectfull Brit Car source shop MAINTAIN very large inventroies of same. Cheers......... Ed PS: W
- /html/mgs/1998-04/msg00300.html (6,939 bytes)
- 7. Re: Lucas Fuses (score: 1)
- Author: Paul Hunt <paul.hunt1@virgin.net>
- Date: Fri, 10 Apr 1998 10:10:11 +0000
- Just to be absolutely clear (as if). My workshop manuals state that the fuse blocks should be fitted with 17 amp current rated, 35 amp blow rated fuses. It would be unwise to fit a 35 amp current rat
- /html/mgs/1998-04/msg00391.html (7,373 bytes)
This search system is powered by
Namazu