Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*MGB\s+Rack\s+\&\s+Pinion\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*MGB\s+Rack\s+\&\s+Pinion\s*$/: 6 ]

Total 6 documents matching your query.

1. MGB Rack & Pinion (score: 1): Author: "BOB" <NOGERA@prodigy.net>; Date: Mon, 17 Nov 1997 22:38:56 -0600; Need some claification here : A) My Haynes manual says to shoot about 10 shots from a grease gun filled with " proper lube ( gear oil ) into the rack housing when reassembling it. In my archives from; /html/mgs/1997-11/msg01182.html (7,609 bytes)
2. Re: MGB Rack & Pinion (score: 1): Author: mgbob@juno.com (ROBERT G. HOWARD); Date: Tue, 18 Nov 1997 09:35:40 EST; Hi Bob, Early MGBs had a grease fitting on the rack that was supposed to receive the ten shots of oil. Confusing? Apparently, for MG stopped installing the fitting. If you need to replenish gear oil; /html/mgs/1997-11/msg01202.html (8,554 bytes)
3. Re: MGB Rack & Pinion (score: 1): Author: "A. B. Bonds" <ab@vuse.vanderbilt.edu>; Date: 18 Nov 1997 11:33:39 -0600; You can also (much more easily) cadge a 50 cc syringe and a short length of tubing and slip the juice in under the rubber bellows. Just loosen the clamp holding the rack side on. A. B. Bonds; /html/mgs/1997-11/msg01209.html (7,192 bytes)
4. Re: MGB Rack & Pinion (score: 1): Author: Art Pfenninger <ch155@FreeNet.Buffalo.EDU>; Date: Tue, 18 Nov 1997 15:56:46 -0500 (EST); I use a glue syringe available at most wood working stores. It takes a while but works fine. ...Art; /html/mgs/1997-11/msg01228.html (7,539 bytes)
5. Re: MGB Rack & Pinion (score: 1): Author: mgbob@juno.com (ROBERT G. HOWARD); Date: Tue, 18 Nov 1997 16:19:57 EST; Yes, this is a better idea. Whichever method you employ, be scrupulous about cleanliness as dirt in the system can turn Rack & Pinion into Rack & Ruin. Bob On 18 Nov 1997 11:33:39 -0600 "A. B. Bonds"; /html/mgs/1997-11/msg01232.html (7,563 bytes)
6. Re: MGB Rack & Pinion (score: 1): Author: Ray McCrary <spook01@mindspring.com>; Date: Tue, 18 Nov 1997 18:24:10 -0600; Re: Rack oil replacement If the rack is not installed in the car, such as when you are replacing the boots, try installing one boot and then turn the rack to the vertical. Begin to add the oil to the; /html/mgs/1997-11/msg01243.html (9,731 bytes)

Current List: 1 - 6
Page: [1]