Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Oblong\s+clevis\s+pin\s+holes\s+in\s+pedal\s+box\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Oblong\s+clevis\s+pin\s+holes\s+in\s+pedal\s+box\s*$/: 6 ]

Total 6 documents matching your query.

1. Oblong clevis pin holes in pedal box (score: 1): Author: "Tracy Drummond" <bighealey@charter.net>; Date: Wed, 23 Aug 2006 05:28:38 -0700; I have an oblong hole where the master cylinder rod attaches to the foot pedal. I replaced the clevis pins in both the brake and clutch pedals but alas still some play on the one causing annoying lit; /html/healeys/2006-08/msg00595.html (7,257 bytes)
2. Re: Oblong clevis pin holes in pedal box (score: 1): Author: "Chris Dimmock" <cd3000@bigpond.net.au>; Date: Wed, 23 Aug 2006 23:30:19 +1000; Hi Tracy 2 choices: Weld up the oblong holes; and then redrill them round so the new clevis pin is a snug fit, and grease it. Alternatively - buy new rods, and grease the clevis pins before fitting.; /html/healeys/2006-08/msg00597.html (7,708 bytes)
3. RE: Oblong clevis pin holes in pedal box (score: 1): Author: "Ned Smith" <smithn00@kitepilot.net>; Date: Wed, 23 Aug 2006 10:45:27 -0400; I welded the hole closed and redrilled. Ned Smith BJ8 near Chattanooga, TN N34.98 W85.5 I have an oblong hole where the master cylinder rod attaches to the foot pedal. I replaced the clevis pins in b; /html/healeys/2006-08/msg00599.html (7,681 bytes)
4. Re: Oblong clevis pin holes in pedal box (score: 1): Author: "Mark and Kathy" <mgtrcars@galaxyinternet.net>; Date: Wed, 23 Aug 2006 13:36:16 -0400; Oh buddy your gonna have some fun. Three options: 1- drill out all the holes oversized and fit larger pin. 2- Get a better peddle with a normal size hole 3- Weld up the old peddle hole and redrill An; /html/healeys/2006-08/msg00604.html (8,282 bytes)
5. Re: Oblong clevis pin holes in pedal box (score: 1): Author: John Miller <healeys@n4vu.com>; Date: Wed, 23 Aug 2006 13:59:55 -0400; 4. Drill the holes oversize and press in bushes. That way, you'll never have to drill the original pedal arm again. Four...FOUR options (apologies to Monty Python) -- JohnM It is easier to resist at; /html/healeys/2006-08/msg00605.html (7,430 bytes)
6. Re: Oblong clevis pin holes in pedal box (score: 1): Author: "Alan Seigrist Blue 100" <healey.nut@gmail.com>; Date: Thu, 24 Aug 2006 06:40:13 +0800; Funny thing, when I first got my BJ8 these holes were still round but all of the pins were worn out... it seems they used softer metal on the pins than for the metal fork.... do you suppose that was; /html/healeys/2006-08/msg00610.html (7,955 bytes)

Current List: 1 - 6
Page: [1]