- 1. Steering shroud removal (score: 1)
- Author: "R. O. Lindsay" <rolindsay@dgrc.com>
- Date: Thu, 08 Mar 2001 10:07:34 -0600
- Hi Gang, I need to access the ignition switch on the rear of the ignition lock but I am having trouble removing the plastic shrouds around the steering column. The screws come out okay but the two ha
- /html/mgs/2001-03/msg00370.html (7,241 bytes)
- 2. Re: Steering shroud removal (score: 1)
- Author: "R. O. Lindsay" <rolindsay@dgrc.com>
- Date: Thu, 08 Mar 2001 10:10:01 -0600
- ...wouldn't have hurt if I told you on which car, would it? I'm working on the '70 B-GT. Thanks, rick -- Rick Lindsay Diamond Geoscience Research 5727 S. Lewis Ave., Tulsa, OK Voice: +1 918-747-3456
- /html/mgs/2001-03/msg00371.html (7,587 bytes)
- 3. Re: Steering shroud removal (score: 1)
- Author: <paul.hunt1@virgin.net>
- Date: Thu, 8 Mar 2001 16:11:51 -0000
- Can't say if the North American dash makes things more difficult (if that is what you have) but on the tin dash with the smaller gauges they need a bit of wiggling into just the right orientation bef
- /html/mgs/2001-03/msg00374.html (7,781 bytes)
- 4. Re: Steering shroud removal (score: 1)
- Author: "Doug Wilson" <wilsondf@home.com>
- Date: Thu, 8 Mar 2001 18:09:24 -0500
- Make sure you have all the screws out and "wiggle and yank". It will come
- /html/mgs/2001-03/msg00408.html (7,660 bytes)
- 5. Steering shroud removal (score: 1)
- Author: "R. O. Lindsay" <rolindsay@dgrc.com>
- Date: Thu, 08 Mar 2001 10:07:34 -0600
- Hi Gang, I need to access the ignition switch on the rear of the ignition lock but I am having trouble removing the plastic shrouds around the steering column. The screws come out okay but the two ha
- /html/mgs/2001-03/msg00567.html (7,196 bytes)
- 6. Re: Steering shroud removal (score: 1)
- Author: Bill Saidel <saidel@camden.rutgers.edu>
- Date: Mon, 12 Mar 2001 06:41:43 -0500 (EST)
- never did when I removed mine. Bill Saidel (856) 225-6336 Dept. of Biology (856) 225-6312 FAX Science Building E-Mail: saidel@crab.rutgers.edu Rutgers University 315 Penn Street Camden, NJ 08102-1411
- /html/mgs/2001-03/msg00575.html (7,360 bytes)
- 7. Re: Steering shroud removal (score: 1)
- Author: Dwbradbury@ra.rockwell.com
- Date: Mon, 12 Mar 2001 08:20:30 -0600
- I thought I had the same problem. If you put the turning signal arm & high beam arm in just the right orientation, then seperate the halves & move them around there is a orientation that works. Be pa
- /html/mgs/2001-03/msg00583.html (7,742 bytes)
- 8. Re: Steering shroud removal (score: 1)
- Author: "Andrew B. Lundgren" <lundgren@byu.net>
- Date: Mon, 12 Mar 2001 20:21:03 -0700 (MST)
- Mine didn't, I have a '70. It was a bit of a bugger, but I was able to work it off eventually. -- Andrew Lundgren lundgren@byu.net http://www.itwest.net/~lundgren /// /// mgs@autox.team.net mailing l
- /html/mgs/2001-03/msg00639.html (7,814 bytes)
This search system is powered by
Namazu