- 1. U joint removal (score: 1)
- Author: BarrMark262@aol.com
- Date: Mon, 19 Aug 2002 23:13:19 EDT
- OK: Stupid question of the night. I can't get the ujoints to "pop out" as I am told they will do. I removed the C clips and they move only slightly when I tap the flanges with a hammer. I hammer and
- /html/mgs/2002-08/msg00687.html (7,009 bytes)
- 2. Re: U joint removal (score: 1)
- Author: "Martin C. Libhart" <libhart@cox.net>
- Date: Mon, 19 Aug 2002 23:31:47 -0500
- Get a large C-clamp - mine is 8" - and a socket of the size that is slightly less in diameter than the u-joint cap. Place C-clamp around u-joint, with the socket on one of the caps, and crank the cla
- /html/mgs/2002-08/msg00690.html (7,844 bytes)
- 3. Re: U joint removal (score: 1)
- Author: Charles & Peggy Robinson <ccrobins@ktc.com>
- Date: Tue, 20 Aug 2002 09:28:48 -0500
- I use a large bench vise instead of a C-clamp. Cheers, CR /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive
- /html/mgs/2002-08/msg00709.html (7,765 bytes)
- 4. Re: U joint removal (score: 1)
- Author: "Bob D." <bobmgtd@insightbb.com>
- Date: Tue, 20 Aug 2002 23:18:35 -0500
- I just did my first removal with the good advice of the list. It took a hell of a lot of tapping! I used a socket as a drift. When the cap on the other end started to protrude, I put a bigger socket
- /html/mgs/2002-08/msg00770.html (7,549 bytes)
This search system is powered by
Namazu