- 1. Windshield Wiper (score: 1)
- Author: "Ben Prince" <blprince2@comcast.net>
- Date: Sat, 14 Jan 2006 11:25:18 -0800
- On my BN1, the left windshield wiper blade only travels a few degrees back and forth. The arm slips on the shaft that extends from the wheelbox (items 40 and 35 on page 94 of my year-old Moss catalog
- /html/healeys/2006-01/msg00527.html (7,391 bytes)
- 2. Re: Windshield Wiper (score: 1)
- Author: Awgertoo@aol.com
- Date: Sat, 14 Jan 2006 14:32:40 EST
- I believe the arm should just pry off the shaft. I have seen a few cars where owners have drilled and tapped through the end of the arm cover and into the shaft and pinned the two together with a ma
- /html/healeys/2006-01/msg00528.html (7,874 bytes)
- 3. Re: Windshield Wiper (score: 1)
- Author: "Rich C" <richchrysler@quickclic.net>
- Date: Sat, 14 Jan 2006 15:42:35 -0500
- On the BN1 the wiper arm is secured to the shaft with a locking collet and nut. To release the arm from the shaft, loosen the locking nut immediately under the arm which will allow the split collet
- /html/healeys/2006-01/msg00530.html (9,071 bytes)
- 4. Re: Windshield Wiper (score: 1)
- Author: "Greg Lemon" <glemon@neb.rr.com>
- Date: Sat, 14 Jan 2006 14:30:20 -0600
- On my BN1 there is a nut on the bottom of the wiper arm where it fits on the shaft, tighten the nut to get the wiper tighter on the shaft loosen to take it off, something must be worn however, becaus
- /html/healeys/2006-01/msg00531.html (8,030 bytes)
- 5. Re: Windshield Wiper (score: 1)
- Author: "Ed" <justbrits@comcast.net>
- Date: Sat, 14 Jan 2006 20:08:16 -0600
- Maybe I am way of base (but don't think so<G>) but Ben asked about getting the wiper (blade) ARM of the Wiper Drive Shaft (splined). On the bottom of the "gear" of exposed shaft (above the chrome be
- /html/healeys/2006-01/msg00547.html (7,431 bytes)
- 6. Re: Windshield Wiper (score: 1)
- Author: GSFuqua1@aol.com
- Date: Sat, 14 Jan 2006 23:11:20 EST
- While I agree with Ed I would just use rain X and forget about it. If you have a Tonneau then use it with the rain X and drive right on through. You won't get much wetter than messing with the top an
- /html/healeys/2006-01/msg00554.html (7,112 bytes)
- 7. Re: Windshield Wiper (score: 1)
- Author: "Ben Prince" <blprince2@comcast.net>
- Date: Sat, 14 Jan 2006 22:08:19 -0800
- Thanks to Rich, Ed, Greg and Michael for the advice on my BN1 windshield wipers. I am particularly grateful to Rich for the pictures. I finally got gutsy and pried the left arm off the shaft. It was
- /html/healeys/2006-01/msg00557.html (7,751 bytes)
- 8. Re: Windshield Wiper (score: 1)
- Author: tammie wall <whammie@iopener.net>
- Date: Sun, 15 Jan 2006 09:28:21 -0600
-
- /html/healeys/2006-01/msg00560.html (7,517 bytes)
- 9. Re: Windshield Wiper (score: 1)
- Author: GSFuqua1@aol.com
- Date: Sun, 15 Jan 2006 12:56:48 EST
- Wilber and Mr. Ed, boy does that take you back or what? You must be older than dirt to remember those!! Come to think of it I must be too because I caught them. Ha ha Have a great day!! Gary Ps...Try
- /html/healeys/2006-01/msg00561.html (7,112 bytes)
This search system is powered by
Namazu