Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Won\'t\s+Start\s+II\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Won\'t\s+Start\s+II\s*$/: 7 ]

Total 7 documents matching your query.

1. Re: Won't Start II (score: 1): Author: "scott willis" <ahpowered@hotmail.com>; Date: Mon, 30 May 2005 21:06:43 -0500; I did NOT check my timing when I switched to Pertronix. It ran great and I drove like hell. Any ideas what could have happened? I suppose I need to see if I broke the timing chain. Should I just pul; /html/healeys/2005-05/msg00897.html (9,605 bytes)
2. Re: Won't Start II (score: 1): Author: Patton Dickson <57healey@gmail.com>; Date: Mon, 30 May 2005 22:16:50 -0500; Do the dollar bill test by having someone hold a dollar bill over the exhaust when cranking. It should only blow the bill away. If it pushes and pulls (fluttering) or sucks in only, something is amis; /html/healeys/2005-05/msg00903.html (7,688 bytes)
3. Re: Won't Start II (score: 1): Author: Blue One Hundred <healey.nut@gmail.com>; Date: Tue, 31 May 2005 13:17:12 +0800; It's very easy to see if your timing chain is broken. pull off the dist. cap and turn the motor over... if the distributor rotor doesn't spin, then the chain is broken... I reckon this is not your p; /html/healeys/2005-05/msg00906.html (10,980 bytes)
4. Re: Won't Start II (score: 1): Author: "Bob Spidell" <bspidell@comcast.net>; Date: Tue, 31 May 2005 06:09:05 -0700; If the engine quitting was accompanied by a loud intake backfire, you may have blown the soft plug out of the back of the intake manifold. Happened to me. bs ** Bob Spidell San Jose, CA bspidell@com; /html/healeys/2005-05/msg00913.html (8,864 bytes)
5. Re: Won't Start II (score: 1): Author: Blue One Hundred <healey.nut@gmail.com>; Date: Tue, 31 May 2005 21:48:54 +0800; Good point Bob, I forgot all about that. that's happened to me too. sometimes it doesn't pop all the way out, just partially, so you have to check to see if it's inserted firmly. This plug is located; /html/healeys/2005-05/msg00923.html (9,601 bytes)
6. Re: Won't Start II (score: 1): Author: "scott willis" <ahpowered@hotmail.com>; Date: Tue, 31 May 2005 11:03:27 -0500; Thanks ALL! If this plug is out will the engine show low compression? I have yet to look for this. I timed the engine statically and I'm back on points and not Pertronix. I may be 180 degrees out as; /html/healeys/2005-05/msg00932.html (11,187 bytes)
7. Re: Won't Start II (score: 1): Author: "Bob Spidell" <bspidell@comcast.net>; Date: Tue, 31 May 2005 18:08:27 -0700; Not unless the engine had it before. bs ** Bob Spidell San Jose, CA bspidell@comcast.net '67 Austin-Healey 3000 '56 Austin-Healey 100M **; /html/healeys/2005-05/msg00947.html (7,971 bytes)

Current List: 1 - 7
Page: [1]