- 1. pain in the axle (score: 1)
- Author: Scott Lampert <netscott@earthlink.net>
- Date: Tue, 24 Nov 1998 17:32:24 +0000
- i'm trying to remove my rear axles to install dale's disc break upgrade. i have removed the nuts and bolts holding the back plate. i tryed the chain to the hub (held on with the lug nuts) and pulling
- /html/tigers/1998-11/msg00351.html (6,982 bytes)
- 2. Re: pain in the axle (score: 1)
- Author: ritchie@mcn.org (Armand & Lorie Ritchie)
- Date: Tue, 24 Nov 1998 17:37:57 -0800 (PST)
- Do you have to remove the axles or just the hubs? The hubs come off easy with a hub puller that bolts onto the lug nuts and has a larger screw in the center that you tighten and then give a few raps
- /html/tigers/1998-11/msg00352.html (7,417 bytes)
- 3. Re: pain in the axle (score: 1)
- Author: Tom Hall <modtiger@engravers.com>
- Date: Tue, 24 Nov 1998 18:22:19 -0800
- The tool you need is a puller designed for the Dana type tapered axle. It has a set of 3 or preferably 4 bars which bolt to the lug nuts, and threaded center which aligns with the center of the axles
- /html/tigers/1998-11/msg00353.html (8,185 bytes)
- 4. Re: pain in the axle (score: 1)
- Author: MWood24020@aol.com
- Date: Tue, 24 Nov 1998 21:18:57 EST
- i'm trying to remove my rear axles to install dale's disc break upgrade. Yep, a slide hammer could be the ticket. A BIG slide hammer, as I recall from replacing my rear bearings! Mike
- /html/tigers/1998-11/msg00354.html (7,007 bytes)
- 5. Re: pain in the axle (score: 1)
- Author: "Chris Richards" <richards@northcoast.com>
- Date: Tue, 24 Nov 1998 19:04:45 -0500
- I removed mine yesterday. I was replacing my seals so I also had to remove the hub. What a "Bearcat"!!! A slide hammer will pull the bearing out of the axle housing if you have the four bolts remove
- /html/tigers/1998-11/msg00355.html (8,770 bytes)
This search system is powered by
Namazu