Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*posting\s+from\s+Bob\s+Brown\s+$was\s+HTML$\s+Subject\:\s+OD\s+Question\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*posting\s+from\s+Bob\s+Brown\s+$was\s+HTML$\s+Subject\:\s+OD\s+Question\s*$/: 6 ]

Total 6 documents matching your query.

1. posting from Bob Brown (was HTML) Subject: OD Question (score: 1): Author: Roland Wilhelmy <rwil@sbcglobal.net>; Date: Wed, 14 Jul 2004 16:43:00 -0700; I have a condition that I have not seen addressed here previously and would like suggestions on what to check. My BT7 OD works great on short trips, but on long trips I find that after about an hour; /html/healeys/2004-07/msg00313.html (7,927 bytes)
2. Re: posting from Bob Brown (was HTML) Subject: OD Question (score: 1): Author: "BJ8Healeys" <sbyers@ec.rr.com>; Date: Wed, 14 Jul 2004 20:05:07 -0400; My BJ8 overdrive operated very similarly when I first bought the car. O/D would seem to work normally until after cruising for a while; if I had to stop for any reason, the O/D would not shift back; /html/healeys/2004-07/msg00314.html (9,297 bytes)
3. RE: posting from Bob Brown (was HTML) Subject: OD Question (score: 1): Author: "Michael Salter" <msalter@precisionsportscar.com>; Date: Wed, 14 Jul 2004 21:57:15 -0400; Hi Bob, As Steve suggests the most likely cause is the accumulator. Either the "O" ring between the case and the accumulator body or excessive scoring of the bore. You can remove the accumulator from; /html/healeys/2004-07/msg00318.html (9,264 bytes)
4. Re: posting from Bob Brown (was HTML) Subject: OD Question (score: 1): Author: "Rich C" <richchrysler@quickclic.net>; Date: Wed, 14 Jul 2004 23:26:33 -0400; A tired .30 cent O ring on the accumulator piston. Rich Chrysler -- Original Message -- From: "Roland Wilhelmy" <rwil@sbcglobal.net> To: <BlkBT7@aol.com>; <healeys@autox.team.net> Sent: Wednesday, Ju; /html/healeys/2004-07/msg00319.html (8,678 bytes)
5. Re: posting from Bob Brown (was HTML) Subject: OD Question (score: 1): Author: SJNNOCK@aol.com; Date: Thu, 15 Jul 2004 00:42:59 EDT; Bob ... The problem is most likely the adjustment of the O/D solenoid ... expect to read this in the Healey Marque Magazine in the next few months or read page 54 in my Tech Talk book " Adjusting the; /html/healeys/2004-07/msg00323.html (7,455 bytes)
6. RE: posting from Bob Brown (was HTML) Subject: OD Question (score: 1): Author: "tom felts" <tomfelts@earthlink.net>; Date: Thu, 15 Jul 2004 07:52:16 -0400; B4 doing all this, I'd pull the piston and see if the pin hole is blocked--if so, clean it out and re-install--see if that clears up the problem. It has happened to my OD with the same results. tom; /html/healeys/2004-07/msg00325.html (10,214 bytes)

Current List: 1 - 6
Page: [1]