Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*rear\s+axle\s+paper\s+gasket\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*rear\s+axle\s+paper\s+gasket\s*$/: 7 ]

Total 7 documents matching your query.

1. rear axle paper gasket (score: 1): Author: Warthodson@aol.com; Date: Thu, 17 Aug 2006 14:49:30 EDT; While rebuilding the rear axle on my 3000, I have run into the following The shop manual states that the new bearing & spacer must protrude beyond the outer face of the hub & paper gasket (washer) by; /html/healeys/2006-08/msg00380.html (7,386 bytes)
2. RE: rear axle paper gasket (score: 1): Author: "Quinn, Patrick" <Patrick.Quinn@det.nsw.edu.au>; Date: Fri, 18 Aug 2006 08:55:13 +1000; G'day Gary Back before when Austin-Healey parts were available on almost every street corner, owners had to be resourceful when it came to parts. There was a time when things like gaskets were as eas; /html/healeys/2006-08/msg00382.html (9,097 bytes)
3. RE: rear axle paper gasket (score: 1): Author: "WILLIAM B LAWRENCE" <ynotink@msn.com>; Date: Fri, 18 Aug 2006 01:36:12 +0000; The best way to make a paper gasket is to beat it out on the surface you want to seal with a very small ball pein hammer. It's just as easy as cutting them with a scissors and the dimensions will be; /html/healeys/2006-08/msg00386.html (10,190 bytes)
4. Re: rear axle paper gasket (score: 1): Author: "Alan Seigrist Blue 100" <healey.nut@gmail.com>; Date: Fri, 18 Aug 2006 09:51:55 +0800; Even better is to use a hard plastic mallot so you don't mar the surface of the hub... But heck I find the pre cut paper gaskets to be a great convenience. Alan '52 A90 '53 BN1 '64 BJ8 On 8/18/06, W; /html/healeys/2006-08/msg00389.html (10,434 bytes)
5. Re: rear axle paper gasket (score: 1): Author: "63AHBJ7" <63AHBJ7@comcast.net>; Date: Thu, 17 Aug 2006 21:17:01 -0500; <<The best way to make a paper gasket is to beat it out on the surface you want to seal with a very small ball pein hammer. >> Yep, Bill. Been doing that for a very, very long time<G>! And Alan, plas; /html/healeys/2006-08/msg00390.html (7,289 bytes)
6. Re: rear axle paper gasket (score: 1): Author: "Greg Lemon" <glemon@neb.rr.com>; Date: Thu, 17 Aug 2006 21:16:38 -0500; I am confused about the ball peen hammer method of making a gasket, are you saying you beat around the edge and it cuts the gasket, or it makes a crease or impression in the paper so that you have a; /html/healeys/2006-08/msg00391.html (7,161 bytes)
7. Re: rear axle paper gasket (score: 1): Author: "WILLIAM B LAWRENCE" <ynotink@msn.com>; Date: Fri, 18 Aug 2006 02:50:04 +0000; The technique is to tap on the gasket paper and break it over the edge of the mating service. Don't strike hard enough to damage the metal, just hard enough to break the fibers in the paper. I usuall; /html/healeys/2006-08/msg00394.html (8,108 bytes)

Current List: 1 - 7
Page: [1]