Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*stuck\s+wire\s+wheel\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*stuck\s+wire\s+wheel\s*$/: 7 ]

Total 7 documents matching your query.

1. Stuck Wire Wheel (score: 1): Author: Charles & Peggy Robinson <ccrobins@ktc.com>; Date: Sat, 19 Feb 2005 13:28:15 -0600; Some of you may remember that last summer I was looking for ways to get a stuck WW off the left front hub of my B. Tried driving in circles with the knock-off loosened, various pullers, etc, etc. Not; /html/mgs/2005-02/msg00187.html (6,841 bytes)
2. Stuck wire wheel (score: 1): Author: Bud Krueger <bkrueger@ici.net>; Date: Tue, 30 May 2000 21:54:05 -0400; My 'new' 52TD has the TF wire wheel conversion. It hasn't been on the road since '66, ergo, the wire wheels have grown quite attached to their hubs. Any hints on how to get them to break off their in; /html/mgs/2000-05/msg01487.html (6,955 bytes)
3. RE: Stuck wire wheel (score: 1): Author: Duinhoven_Hans@emc.com; Date: Wed, 31 May 2000 02:15:30 -0400; Hi Bud, Hope to see some pictures of the basket TD. About the stuck wheels: lift the wheel make the hub real hot then tap with a hammer on the outer side of the rim turn the wheel 30 degrees and do t; /html/mgs/2000-05/msg01499.html (7,518 bytes)
4. RE: Stuck wire wheel (score: 1): Author: James Nazarian Jr <James.Nazarian@Colorado.EDU>; Date: Wed, 31 May 2000 12:15:15 -0600 (MDT); I can't say that I know much of anything about Ts but if you get the hub too hot you are going to soften up the metal and change its properties. I would think that the hubs are fairly hard so that th; /html/mgs/2000-05/msg01542.html (8,514 bytes)
5. stuck wire wheel (score: 1): Author: "Hutmacher, Greg" <ghutmacher@stanleyworks.com>; Date: Tue, 9 Feb 1999 15:00:50 -0500; Anybody have a secret trick for removing a stuck wire wheel from an LBC? The knock off comes off okay, but the right rear wheel will not budge from the spline (rusted probably because the car sat imm; /html/mgs/1999-02/msg00434.html (7,138 bytes)
6. RE: stuck wire wheel (score: 1): Author: "Dodd, Kelvin" <doddk@mossmotors.com>; Date: Tue, 9 Feb 1999 11:57:59 -0800; The old wives tell of loosening the knock off, then driving around in a tight circle. I have not had a chance to try that, but some say it works. On my car I had to use careful application of heat,; /html/mgs/1999-02/msg00436.html (8,161 bytes)
7. RE: stuck wire wheel (score: 1): Author: Rene van Maanen <renevm@support.neth.hp.com>; Date: Tue, 9 Feb 1999 22:10:39 +0100; I have read: Turn the knock-ons a little loose, and drive the car slowly in corner after corner. Either using it's own engine power, or towed. The splines should come loose this way. Am I making myse; /html/mgs/1999-02/msg00445.html (7,621 bytes)

Current List: 1 - 7
Page: [1]