- 1. trans question (score: 1)
- Author: "James Shope" <healeymanjim@JoiMail.com>
- Date: Mon, 1 May 2006 20:55:16 -0700
- i bought a side shift transmission from a lister, which has a tag that says bn7 on the top. the old side shifter i took out had a tag that said bn4 on the top. laboring under the assumption that most
- /html/healeys/2006-05/msg00065.html (6,965 bytes)
- 2. Re: trans question (score: 1)
- Author: "David Ward" <david@bighealey.ltd.uk>
- Date: Wed, 3 May 2006 07:31:04 +0100
- Hello James, The internal splines in the overdrive are out of phase. To rectify this you have to line them up with a long probe inside the overdrive. Afterwards remember that you can only rotate the
- /html/healeys/2006-05/msg00068.html (7,909 bytes)
- 3. RE: trans question (score: 1)
- Author: "Michael Salter" <msalter@precisionsportscar.com>
- Date: Wed, 3 May 2006 08:15:47 -0400
- Hi James, The overdrive units, although they could be different ratios, are certainly interchangeable. Check the alignment of the parts very carefully and try it again. I always use a spare 3rd motio
- /html/healeys/2006-05/msg00071.html (7,612 bytes)
- 4. Re: trans question (score: 1)
- Author: TRICARB@aol.com
- Date: Wed, 3 May 2006 11:57:52 EDT
- The gears in the unidirectional clutch are not lined up thus not letting your input shaft to bottom out. Bill
- /html/healeys/2006-05/msg00072.html (6,477 bytes)
This search system is powered by
Namazu