Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Healeys\]\s+Bn2\s+excessive\s+oil\s+pressure\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Healeys\]\s+Bn2\s+excessive\s+oil\s+pressure\s*$/: 17 ]

Total 17 documents matching your query.

1. [Healeys] Bn2 excessive oil pressure (score: 1): Author: Jose Vicente Vargas <jvvmusme@yahoo.com>; Date: Sat, 21 May 2011 23:20:36 -0500; After the engine rebuilt I had normal oil pressure 20-30 at 1000 rpm and 40-50 At 4000 rpm. Using the spin oil filter adapter from moss and the cheap fram spin on oil filter (moss # 235-880) After an; /html/healeys/2011-05/msg00422.html (7,183 bytes)
2. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: Oudesluys <coudesluijs@chello.nl>; Date: Sun, 22 May 2011 09:56:54 +0200; The main cause is probably the earlier FRAM oil filter being of poor quality and having a rather high resistance. That said, 90 psi is very high so is this K&N filter OK and did you try another? Howe; /html/healeys/2011-05/msg00423.html (6,916 bytes)
3. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: Bob Spidell <bspidell@comcast.net>; Date: Sun, 22 May 2011 13:39:01 +0000 (UTC); Regardless of the filter, the oil pressure relief valve should limit the pressure to a maximum of (typically) 60-70psi. 30psi @ 1,000rpm is great, but 90 @ 4,000 seems too high; the obvious culprit; /html/healeys/2011-05/msg00425.html (8,377 bytes)
4. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: Jose Vicente Vargas <jvvmusme@yahoo.com>; Date: Sun, 22 May 2011 09:03:45 -0500; I have dennis welch oil pump Using 20-50w oil The holes of the adapter are correctly aligned This situation afyer the oil and filter change Sent from my iPad pressure to a maximum of (typically) 60-7; /html/healeys/2011-05/msg00426.html (8,875 bytes)
5. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: bighealey3k@aim.com; Date: Sun, 22 May 2011 10:49:59 -0400 (EDT); Try using the old filter (if you still have it) and see if the problem corrects it's self. If the problem is still there then your problem is some were else. Larry I have dennis welch oil pump sing; /html/healeys/2011-05/msg00428.html (9,548 bytes)
6. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: Alan Seigrist <healey.nut@gmail.com>; Date: Sun, 22 May 2011 23:01:42 +0800; Sometimes if there's an air bubble in the guage line, it will read incorrectly. Disconnect from back of guage, run motor for a few seconds until squirting out, then re-attach.... Alan -- Sent from my; /html/healeys/2011-05/msg00429.html (9,975 bytes)
7. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: "Herbert Miller" <hgmiller3@qwest.net>; Date: Sun, 22 May 2011 10:42:20 -0500; Please tell me why an air bubble in the gauge line would cause the gauge to read incorrectly. Herb Miller Sometimes if there's an air bubble in the guage line, it will read incorrectly. Disconnect fr; /html/healeys/2011-05/msg00432.html (12,157 bytes)
8. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: Oudesluys <coudesluijs@chello.nl>; Date: Sun, 22 May 2011 18:14:50 +0200; Sorry Alan, but that is nonsense. The only thing an air bubble may do is perhaps provide some damping if there is a serious vibration in the oil pressure, which is not likely or create a slight delay; /html/healeys/2011-05/msg00433.html (8,770 bytes)
9. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: npaul72464@aol.com; Date: Sun, 22 May 2011 12:26:05 -0400 (EDT); I had the same problem when I changed the oil in my BN7 to 20/50 Valvoline racing oil. Went back to straight 30 and I was back to 40lbs. Ned Paulsen 1960BN7 After the engine rebuilt I had normal oil; /html/healeys/2011-05/msg00434.html (9,528 bytes)
10. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: I Erbs <eyera3@gmail.com>; Date: Sun, 22 May 2011 09:51:45 -0700; Check oil level often. If pressure is that high. It will find its way out to I Erbs Sent from my iPod coudesluijs.vcf] http://autox.team.net/mailman/options/healeys/eyera3@gmail.com _________________; /html/healeys/2011-05/msg00436.html (9,664 bytes)
11. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: Jose Vicente Vargas <jvvmusme@yahoo.com>; Date: Sun, 22 May 2011 12:01:50 -0500; I had 20/50w a nd again I have 20/50.... Could it be an adultered or used oil ? I notice that the oil pressure is higher when the carbis hot.... I live in a Banana Republic so a funnynoil is possible; /html/healeys/2011-05/msg00437.html (10,301 bytes)
12. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: John Harper <ah@jharper.demon.co.uk>; Date: Sun, 22 May 2011 18:29:58 +0100; One rather obscure problem that can cause the bypass valve not to open is if a hole in the sump gasket is not cut or for some other reason blocked. There is a service sheet on this somewhere but take; /html/healeys/2011-05/msg00438.html (10,852 bytes)
13. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: Jose Vicente Vargas <jvvmusme@yahoo.com>; Date: Sun, 22 May 2011 13:14:16 -0500; I just changed the oil filter to a 4 dollar one and the same thing....... Sent from my iPad a hole in the sump gasket is not cut or for some other reason blocked. gaskets used on later 2.2 or 2.5 lit; /html/healeys/2011-05/msg00439.html (11,034 bytes)
14. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: Bob Johnson <bjsbj8@gmail.com>; Date: Sun, 22 May 2011 16:42:10 -0400; Was youe engine really, really warmed up when you got to 4000 rpm, or still somewhat cool? If not hot, maybe th 50 part of the 20/50w was impacting your reading. Bob Johnson Bj8 I just changed the oi; /html/healeys/2011-05/msg00444.html (8,442 bytes)
15. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: Jose Vicente Vargas <jvvmusme@yahoo.com>; Date: Sun, 22 May 2011 16:10:51 -0500; Warmed and cool... No difference I change to a cheap oil filter and nothing... Jose Sent from my iPad somewhat cool? If not hot, maybe th 50 part of the 20/50w was impacting your reading. ___________; /html/healeys/2011-05/msg00448.html (9,027 bytes)
16. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: Per Schoerner <healeyguy@bredband.net>; Date: Sun, 22 May 2011 23:30:22 +0200; I suggest you check that hole in the sump gasket that John Harper suggests. This is the escape route for the excess oil. If that hole is not open no oil will pass by no matter what the pressure is.; /html/healeys/2011-05/msg00449.html (11,223 bytes)
17. Re: [Healeys] Bn2 excessive oil pressure (score: 1): Author: Oudesluys <coudesluijs@chello.nl>; Date: Mon, 23 May 2011 08:18:33 +0200; Question is: was the gasket replaced just before the raise in oil pressure occurred? If the gasket was not replaced this cannot be the cause. From all descriptions and try outs I can only conclude th; /html/healeys/2011-05/msg00466.html (8,331 bytes)

Current List: 1 - 17
Page: [1]