> From: Peter Pelletier [mailto:ppellet@banet.net]
> Sent: May 10, 2000 6:30 PM
>
> Does anyone have a template for the rear diff. mount
> reinforcements? I am looking for the inside & outside
> diameter and the thickness of the large weld on washer
> for the rear differential mount.
Peter:
I am not totally clear on what you are really asking...but there is a pretty
good article on the _reinforcements_ at
<http://www.vtr.org/maintain/diff-mounts.html>. As for the washers, I am not
aware of any that 'weld on'.
( You need something which reads MS Word format to access the template
document on the page above )
Peter Zaborski -- CF58310 UO
|