On Fri, 30 Jun 2000
tr6taylor@webtv.net (Sally or Dick Taylor) wrote:
snip
> The brake warning light, as well as the oil pressure warning light,
(in
> the tach face) should glow feintly when the ignition key is turned to
> the "start" position. This is controlled by the three-pronged pressure
> switch coming out of the engine block, (to the bottom left of the
> distributor.) When oil pressure is sensed, it opens the circuit and
> both of these lights go out. If yours never come on with the key, one
> or more of these wires isn't making contact at this switch, OR not
> connected to the right terminal. You didn't say whether these lights
or the bulb has had it.
Gary
Digest '75 TR6
Severn, MD
|