William..... tell me more about your too tall springs! I restored my TR250
3 years ago and the springs that I put in (I think came from TRF) make the
car sit too high. I thought over time they may 'bed' in...no luck. I also
put in poly bushings so the ride is very harsh. I remember having to take
the rear axles out to get the rear springs in....something I didn't have to
do on my TR6. Today I ordered the '30% stiffer than stock' springs from
BPNW. I had those on my TR6 and the ride was OK.
Bruce Harding
68 TR250
80 TR8
|