Pat,
I'm afraid that you're going to have to remove the adapter. It sounds like
you have at least 2 o-rings in the groove.
Remove the adapter and use a sharp awl to fish in the groove. You are likely
to find an extra o-ring is the reason for your leaks.
Peter
'68 TR250
on 3/8/04 3:42 PM, webb@daikin-america.com at webb@daikin-america.com wrote:
> Anyone have problems getting the spin-on oil filter adaptor to quit
> leaking?
>
> I just installed one (from my 74 TR6) on to my 76 TR6 using a new outter
> o-ring from Moss.
>
> When I cranked the engine the adaptor leaked alot. Tried tightening the
> bolt which helped but it still leaked a steady stream.
>
> Anyone had any issues with the Moss o-ring? Mine looked fine.
>
>
> Thanks, Pat
|