Ken,
I believe there is a hole on the outside of the piece that holds the needle.
You should find a small screw in that hole that will free up the needle for
removal.
Mark Bullard
Kailua, HI
----- Original Message -----
From: "Ken Davis" <ken.davis@comcast.net>
To: "6pack" <6pack@autox.team.net>
Sent: Sunday, March 28, 2004 6:38 AM
Subject: Carb Disassembly Question
> I've removed the top, diaphragm, and plunger assembly. I removed the
needle
> set screw. I have attempted to unscrew the needle assembly from within
the
> plunger, but... I have the Allen wrench in there, but nothing is turning,
> either way. How much force should I be prepared to use, and am I correct
> in (un)screwing counter clockwise to free it up?
>
>
> Ken
> 73 '6 CF7000U0
|