6pack
[Top] [All Lists]

RE: Question on later TR6 seat frames.

To: Don Malling <dmallin@attglobal.net>
Subject: RE: Question on later TR6 seat frames.
From: "k6na@cts.com" <k6na@cts.com>
Date: Thu, 6 May 2004 11:10:13 -0700 (PDT)
Don,
On the 74.5 there are two levers (outer side of seat).  One has a black
plastic handle and it lets the seat tip forward.  The other is a chromed
handle, which allows the seatback to tilt fore and aft.

--Glenn/San Diego

Don Malling <dmallin@attglobal.net> writes:
>I have a TR250 and the seat does not recline, but there is a lever that 
>releases the back of the seat bottom from the seat track, and the entire 
>seat pivots up and forward rotating at the seat's front track mounting 
>points.
>
>For the later TR6, from eBay pictures, there appears to be only the seat 
>back reclining lever. Yet Moss shows two levers and calls one a safety 
>catch #2
>
>  http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=32954
>
>TRF appears to only list the seat back reclining lever.
>
>Do both exist on the later TR6 seats, or does the later TR6 seat back 
>simply tilt forward with the seat bottom remaining attached to the floor 
>track front and back?





<Prev in Thread] Current Thread [Next in Thread>