Instead of the pan in the %^$^ nylon ones use the bronze top hat bushings
described on the Buckeye web page.
http://web.archive.org/web/20030506100803/www.buckeyetriumphs.org/technical/A
ccBearing/AccBearing.htm<http://web.archive.org/web/20030506100803/www.buckey
etriumphs.org/technical/AccBearing/AccBearing.htm>
These work great even though mine were installed with the body off the frame.
You will need to drill the right side bushing out so it fits over the knurled
section of the accelerator shaft. To cut the grove for the snap ring mount the
bushing on a drill press with a bolt, then use a hack saw blade to cut it at
the desired depth. These will last a long time. Mine have been in the car for
3.5 months and work great!!! (just a little humor here)
Richard Seaton
RSH17@msn.com<mailto:RSH17@msn.com>
View My restoration @
(http://groups.msn.com/Richards69TR6Restoration<http://groups.msn.com/Richard
s69TR6Restoration>)
OR
http://www.triumphowners.com/registry.cgi?sectionID=111014&vehicleID=92<http:
//www.triumphowners.com/registry.cgi?sectionID=111014&vehicleID=92>
|