That's where it is on mine. It is a small nylon button, maybe 1/4"
diameter and sticking up about 1/8" vertically from the center of the
rack and is very close to the right hand flange, maybe 1/4" inboard from
the flange. It gets held in place by the right hand mount. If the button
has gone you should still have a hole, or maybe the button is fully
depressed in the hole and you just cant see it due to paint, crud, bad
lighting etc..
Stan
-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net] On
Behalf Of JOHN JOHNSON
Subject: Steering Rack (nylon button?)
In the instructions for the Goodparts rack mount kit it mentions a nylon
button. "Make sure that the nylon button is in position ,cover it with
silicone to seal against moisture." I don't have a nylon button on my
rack
any idea what or where this is? The instructions say it is held in place
by
the right side mount.
|