Todd,
That is a common problem with all types of 15X7 0 offset wheels when you are
using the original uprights. 30 years of pressure cause them to sag. I have
heated them with a torch but it is best to replace them with new.
Mike
-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net] On
Behalf Of Todd Bermudez
Sent: Friday, September 15, 2006 8:00 PM
To: Six Pack
Subject: Konig Rewinds
Hi all,
I'm very happy to report that I'm the proud new owner
of a set of Konig Rewinds.
The guys at the tire shop were very helpful & check
for rubbing. As expected they hit the upper A-Arms at
full lock in both directions. The manager of the shop
ground(with my blessing) ground off a bit of material
from the A-Arms. All seemed to be well.
When I left the shop(while backing), I turned the
wheel to lock & heard grinding...then during some hard
cornering(forward)...more grinding.
Any experiences with these wheels & what needs to be
done to ELIMINATE the metal to metal stuff? It
doesn't do it at rest...well, jacked up off the
ground.
TIA,
Todd Bermudez
TRIALS Bound in very few days!
ps Anyone that's passing through Cincy on Thursday
morn is welcome to join us. We have a group heading
up from Cincy via Granville then up all the back roads
Tired of spam? Yahoo! Mail has the best spam protection around
|