I can only describe what I did with mine. I removed any loose rivets and
replaced them with grade 10 button head cap screws (black oxide finish). I
secured them with jet nuts so they would not come loose.
No problems since.
Cogito Ergo Zoom
I think, therefore I go fast
From: email@example.com [mailto:firstname.lastname@example.org] On
Behalf Of Kevin McNelis
Sent: Friday, October 02, 2009 8:30 AM
Subject: [6pack] Soft top frame
OK- soft top frame, front "headrail" (the part that seals against the
windshield). It is attached at each corner to the rest of the frame with
little "ball joints". That is, there are little ball shaped rivets that
extend through holes in the side frames.
One of mine has come loose. That is, the ball pulled through the hole and
out. Suggestions on how to put it back and KEEP IT THERE??
Support Team.Net http://www.team.net/donate.html