The problem wasn't with the filter (once I got one that would fit in the
allotted space) it seemed to with the adapter itself. Oh, well. . .
Sam
In a message dated 2/18/2011 9:35:20 P.M. Central Standard Time,
budscars@comcast.net writes:
You need to be sure to screw the threaded post in far enough so that the
filter rubber is flush/tight to the adapter so that the oil filter can
tighten snuggly to the rubber ring..RB
----- Original Message -----
From: <TRDOCTOR@aol.com>
To: <tr6@atlasok.com>
Cc: <fot@autox.team.net>; <thomaschronister@cox.net>; <akgraves@cox.net>;
<6pack@autox.team.net>; <triumphlist@autox.team.net>
Sent: Friday, February 18, 2011 6:53 PM
Subject: [Fot] Oil Filter Adapter
>I finally gave up on the oil filter adapter on the GT6 and put the
canister
> back on. It wasn't fun taking the adapter off or putting the canister
> back on but it is done and the canister doesn't leak, at least right
now.
> We'll see what happens.
> This is what happened with the TR6 when I first put on an adapter.
Tried
> one a few years later from a different vendor and manufacturer. No
> problems with it now. I bought the new adapter from a major supplier
(the
> one for
> the GT) but it just would not quit leaking.
>
> Sam
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/fot/budscars@comcast.net
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|