Tough without damaging the steel lines.
------Original Message------
From: Bill Wellbaum
Sender: 6pack-bounces@autox.team.net
To: TR-6 list
Subject: [6pack] TR-6 brake booster
Sent: Nov 14, 2011 7:49 AM
Time to replace the brake booster. Shop manual says to drain the reservoir
and remove the master cylinder--which means on reassembly you have to bleed
the brakes. Is it possible to remove/replace the booster without completely
disconnecting the reservoir/master cylinder from the hydraulic lines first?
Bill Wellbaum
Las Vegas
________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/6pack/lfm614@aol.com
________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|