Not true! My Uncle removed and replaced my Series II starter "Back in the
day", using a very long 3/8" extension and some very colorful language.
This is not to say it was easy. If I remember correctly, the extension was
long enough to clear the front of the header.
Bill
----- Original Message -----
From: "Louis & Laila" <bwana@c2i2.com>
To: "MICHAEL JONES" <jonesmp@prodigy.net>; <alpines@autox.team.net>
Sent: Monday, July 11, 2005 2:30 PM
Subject: Re: Starter motor
> To remove the starter motor from a series 2, one must remove the headers.
> If there is an easy way, I have never learned it. The series 3, 4, 5 with
> cast iron headers can be removed with a little finesse, but not the
> series 1 or 2. Sorry brother, but the intakes come off easy enough.
> ----- Original Message -----
> From: "MICHAEL JONES" <jonesmp@prodigy.net>
> To: <alpines@autox.team.net>
> Sent: Sunday, July 10, 2005 8:49 PM
> Subject: Starter motor
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|