F = P*A
Since the force (the weight of the doors) is constant, and the larger cylinder
would have a larger area, then the pressure is lower. Of course, with a larger
area, the volume of air is also larger, and therefor you're going to deplete
your
reservoir tank faster.
Seth
#1544
*********** REPLY SEPARATOR ***********
On 12/2/01, at 1:32 PM, Maycinc@cs.com wrote:
>The pressure also
>depends on what size cylinders you have. The originals are a larger diameter
>than the replacements and so would take a lower pressure (or is it higher?).
>Marvin
>#1343
///
/// bricklin@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|