$99 is a bit high for the pump. You can get one from Napa for a lot less.
Marvin
In a message dated 6/10/2004 4:04:19 PM Mountain Daylight Time,
jblair1948@cox.net writes:
> Serge,
>
> Makes sense as that's one of the vechiles listed for the Eaton PS pump.
>
> Here's one site that has the pumps - don't know if they can help with the
> remote resvior:
> http://www.mustangsplus.com/Merchant2/merchant.mv?screen=PROD&Store_Code=MPF
> MP&Product_Code=04309
>
> Here's another:
> http://www.precisionfluidpower.com/ - Eaton repair - may be able to help.
>
> How bad is the leak, and is it from the bottom of the metal? You might be
> able to pull the resivor and either have some one weld up the hole, or
> try using some JB weld on the outside around the hole(s).
>
> Let us know what happens.
>
> John
|