At 06:14 AM 3/8/2006 -0800, greg monfort wrote:
>Greets!
>
>You need between 3.5-7 psi at the valve seat for
>street apps, so any higher requires an in-line
>regulator. If the pressure drops too low then it will
>lean out under certain conditions. Assuming the stock
>pump is working properly and there's no higher than
>stock flow restrictions in the system (clean
>filters/lines, etc.), it will be fine.
>
>FWIW, I prefer to use an electric pump/regulator.
>NAPA's 610-1050 is inexpensive and works well with no
>regulator and 610-1049 with one.
Greg,
How do you have the electric pump wired in? What are you doing about a
cut off switch?
John
John T. Blair WA4OHZ email: jblair1948@cox.net
Va. Beach, Va (eBay id: zebra48-1)
Phone: (757) 495-8229
48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V (B1109)
75 Bricklin SV1 (#0887) 77 Spitfire 71 Saab Sonett III
65 Rambler Classic
Morgan: www.team.net/www/morgan
Bricklin: www.bricklin.org
If you can read this - Thank a teacher!
If you are reading it in English - Thank a Vet!!
|