Car Wheel Dollies

["Rob Reilly" <reilly@admail.fnal.gov>]

                       Subject:                               Time:2:59 PM
  OFFICE MEMO          Car Wheel Dollies                      Date:8/18/93
I made a set out of 3/4" plywood and steel casters with 2x2's for stiffeners
and tire blocks. After a few years they sagged so I added a fifth caster in the
center of each dolly. The Mark 5 is on them now. Don't do the jack thing. The
Mark 5 fell off the jack once when I was trying to move the front end over.
That's when I made the dollies.