I agree it's a poorly conceived project for a street car but if he's got the
money to spend he can bid on an extractor manifold I have on eBay
(250837049396) right now that will do it for him.
Best regards,
Gene Gillam
Saucier, MS
--------------------------------------------------
From: <WSpohn4@aol.com>
Sent: Friday, June 17, 2011 2:14 PM
To: <wbeech@flash.net>; <bill_beecher@flash.net>; <triumphs@autox.team.net>;
<british-cars@autox.team.net>
Subject: [Bulk] Re: [British-cars] SU H6 Carbs on an MG-TD
> Poorly conceived project. That is way too much carb for that engine.
> Tell
> him to forget about it.
>
> Bill
>
>
> In a message dated 6/17/2011 12:07:17 P.M. Pacific Daylight Time,
> wbeech@flash.net writes:
>
> Have a friend asking about putting a set of H6 carbs on his '54 MG-TD,
> 1-3/4" down to 1-1/4" . Is there an adaptor/reducer that will allow him
> to
> do this?
> _______________________________________________
> British-cars@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/british-cars/anngene@bellsouth.net
_______________________________________________
British-cars@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|