datsun-roadsters
[Top] [All Lists]

Re: Brake system questions

To: "Mark Sedlack" <msedlack@neo.rr.com>,
Subject: Re: Brake system questions
From: "datsunmike" <datsunmike@nyc.rr.com>
Date: Thu, 22 Aug 2002 19:31:02 -0400
Will the master interfere with your engine?

Mike

----- Original Message -----
From: "Mark Sedlack" <msedlack@neo.rr.com>
To: "Datsun Roadster Mailing List (E-mail)"
<datsun-roadsters@autox.team.net>
Sent: Thursday, August 22, 2002 9:54 AM
Subject: Brake system questions


> This question is mostly to tap the combined brain trust of the list.
>
> Our 66 had a single piston brake M/C.  Don't like the idea of running all
four
> corners on one circuit, so I'm replacing that with a 7/8 bore double M/C
from
> a 75 280Z ( NIB left over from building the Z).
>
> Initially I'm going to use the stock front calipers since the cylinders
are
> good and they have good stopping power ( may do the Volvo thing down the
> road).  The 66 did not have any valves of any sort in the hydraulic
system -
> no combination, metering, or proportioning.  Only had a 4-way junction
block
> with the brake light switch.
>
> I know I will need to be able to adjust the front / rear bias, so I have a
> proportioning valve that will be installed in the rear line.
>
> Most modern disk/drum systems have a metering valve ( usually in the
> combination valve) which does not apply any pressure to the fronts before
the
> rear line pressure builds to approx 75psi, purportedly to move the rear
shoes
> into contact, against the spring retraction force, before the fronts.
> The research I've done on the web and usenet has yielded an evenly matched
> camp of opinions - you know, just like certain anatomy parts, everyone's
got
> one... some say you absolutely need a metering valve, others just as
adamantly
> say you don't.
> There are a couple of aftermarket stree rod brake system manufactures that
> have these - Master Power and ECI, and they say you need one ( course they
> also sell em too)
>
> What's the consensus here?
>
> Mark Sedlack
> OROC
> Cuyahoga Falls OH
> 66 1600 http://home.neo.rr.com/mark2000/images/datsun1600/
> 77 280Z http://home.neo.rr.com/mark2000/images/datsun1600/Z/Z.htm
>
> ///  datsun-roadsters@autox.team.net mailing list
> ///  Send admin requests to majordomo@autox.team.net  or go to
> ///  http://www.team.net/cgi-bin/majorcool
> ///  Send list postings to datsun-roadsters@autox.team.net

///  datsun-roadsters@autox.team.net mailing list


<Prev in Thread] Current Thread [Next in Thread>