datsun-roadsters
[Top] [All Lists]

Re: Water Temp Gauge Wire

To: James Richards <jmr407@mindspring.com>
Subject: Re: Water Temp Gauge Wire
From: "David R. Conrad" <conrad1@gte.net>
Date: Fri, 23 Jan 2004 16:38:40 -1000
James:

On my '68, that wire comes out of the harness an the driver's side of the
engine comp't, at about the location of the windshield washer tank.  In fact,
it may emerge from the harness at (about?) the same location as the conductors
for the washer.

Dave
Kailua-Kona



James Richards wrote:

> Need a little advice on an easy way to find the YW wire for the Temp
> sensor on a 69 1600.
>
> I purchased this roadster with a blow head gasket and have reworked and
> replaced the head. When I disassembled the head I noticed the temp senor
> was not hooked up or and connectors for it in the general area.  I would
> like to enable this sensor before firing up roadster for the first time.
> The schematic shows a strait run with no connector between the gauge and
> the sensor in the head.  I really do not want to open up the harness and
> trace this wire from the gauge.  Does anyone know what the original
> routing of this wire was and where it comes trough the firewall?
>
> James & Susan Richards
> jmr407@mindspring.com






<Prev in Thread] Current Thread [Next in Thread>