Be careful about the threads. The threads on the original switch are
1/8 BSPT and have 28 threads per inch and a different thread form than the
1/8 NPT that have 27 threads per inch as described below.
May leak and may not leak?
Stan
==
At 09:57 AM 9/29/2005 -0400, Mark Sedlack wrote:
>http://www.pegasusautoracing.com/ProductDetails.asp?RecId=1146
>www.summitracing.com part# PRF-80171
>either will work - 1/8NPT brake fluid pressure switch
>
>Mark Sedlack
>ZROC
>Cuyahoga Falls OH
>66 1600 http://www.mildevco.net/chevypowereddatsuns/
>77 280Z http://www.mildevco.net/chevypowereddatsuns/
>
>----- Original Message -----
>From: "Mike H." <twobeaners@earthlink.net>
>To: <datsun-roadsters@autox.team.net>
>Sent: Thursday, September 29, 2005 8:16 AM
>Subject: 67-1600 Brake Switch
>
>
>> Hi Guys,
>> Any of you know of a part interchange number or aftermarket replacement
>for early
>> 67-1600 single cyl. brake light switch?
>> Thanks,
>> Mike H. '67-1600
|