Having just done the exact same thing - I have found the following to work
Using the appropriate size socket, and in my case a torque wrench, because
of it's length, I just positioned it so that the wrench was laying on the
ground and then I stood on the a-Arm - took some time, but off it came.
FWIW
----- Original Message -----
From: "Eddie" <eddietude@socal.rr.com>
To: "Tim" <tputland@charter.net>
Cc: "datsun-roadsters: autox.team.net" <datsun-roadsters@autox.team.net>
Sent: Sunday, March 22, 2009 3:40 PM
Subject: Re: [Roadsters] Ongoing suspension issues--pay it forward???
> Tim,
>
> If you're talking about the lower a-arm shaft that the bushings screw
> into, you need a very large impact wrench to get those off. A long pipe
> and socket won't usually do it. Those things are HARD to get off...
> Impact wrench is the only way to go...
> Also, if the threads on that shaft are damaged, you can get a brand new
> aftermarket one from Rare Parts. That was the part I had made awhile
> back, and I'm sure they have them still...
>
> Eddie
>
>
>
> Tim wrote:
>> I was able to dismantle the lower A-arm assemblies fairly easily once I
>> had a socket that fit the bushing nuts and a four foot piece of pipe for
>> leverage. As I started this process, I noticed that the REAR bar of one
>> A-arm set up was bent--sure wish I had noticed this before I pulled it
>> off the part car!! So, now I need one. Does any one have one of these
>> parts that they would be willing to let go free or cheap?
>>
>> Also, it is ok to re-use a lower shock mount plate if the hole isn't 100%
>> round? Since the shock itself has mounting washers, etc, can I re-use
>> this mounting plate?
>>
>> Thanks
>>
>> Tim
>> Belleville, WI.
>> '70 SPL AND SRL
>> Still clueless but always learning
>> ________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> You are subscribed as eddietude@socal.rr.com
>>
>> Datsun-roadsters mailing list
>>
>> http://www.team.net/archive
>>
>> http://autox.team.net/mailman/listinfo/datsun-roadsters
> ________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as granvillecomputing@hotmail.com
>
> Datsun-roadsters mailing list
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/datsun-roadsters
________________________________________
Support Team.Net http://www.team.net/donate.html
Datsun-roadsters mailing list
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/datsun-roadsters
|