Re: Lower A-Arm Studs

[WEmery7451@aol.com]

In a message dated 2/2/02 1:35:16 PM Pacific Standard Time, 
jherrera@fcc.cc.md.us writes:

<< Dave: It seems to me that removing the studs would make the spring pan 
harder to install. It is usually harder for me to line up holes than slide a 
hole over a stud.  J.R. >>

I agree with the above statement.  If you are lowering the front of the car, 
you do not have to compress the springs very far to bolt up the spring pan, 
with the car frame sitting on jack stands.