Be careful choosing a substitute for your TR6 flywheel bolts. As you noted
the bolts heads are oversize. This is important because it spreads the
clamping force over a larger area. The diameter of the unthreaded part of
the bolt is also oversize. The bolts double as centering dowel pins.
Why not use brand new OEM flywheel bolts?
At 06:40 PM 8/23/2002 -0400, Robert Dardano wrote:
>Hello everyone I have been trying to get the correct bolts.
--
Erik Quackenbush, Midwest Filter Corporation
1-847-680-0566 http://www.midwestfilter.com
|