fot
[Top] [All Lists]

Re: Flywheel bolts

To: 19to1tr6@attbi.com, fot@autox.team.net
Subject: Re: Flywheel bolts
From: EPRacer@aol.com
Date: Sat, 24 Aug 2002 09:44:29 EDT
Rob:

Check to make sure the aluminum flywheel is the same thickness at the 
mounting point as the stock flywheel.  My Tilton flywheel is much thinner and 
uses shorter bolts.  Check Coast Fabrication for NAS or MS21250 bolts.  They 
are available in many lengths and are as strong or stronger.

Hope this helps,
Lyn Pollock
EPRacer@aol.com

<Prev in Thread] Current Thread [Next in Thread>