fot
[Top] [All Lists]

Re: Head Sealing Problem?

To: BillB@bnj.com, rgk@flash.net, rem@cbord.com, cartravel@pobox.com,
Subject: Re: Head Sealing Problem?
From: BillDentin@aol.com
Date: Wed, 26 Feb 2003 15:23:08 EST
In a message dated 02/26/2003 12:59:04 PM Central Standard Time, 
BillB@bnj.com writes:


> I don't recommend the aluminum radiator that Cambridge Motorsports sells.
> Look nice, but is very fragile and doesn't help that much with cooling.
> Instead, go to a radiator shop that can manufacture custom radiators. I
> got a great one made for the cheater for about 200 bucks that solved all
> my problems (well, all my cooling problems) in fact I had to block off
> part of it because it was cooling incoming water so much that the
> thermostat cycled temperature too much. After a lot of experimentation
> with bypasses and ports in the thermostat, no thermostat, orifices and
> fazzammas I block off a third of the radiator with aluminum sheet on the
> back. A problem you'd probably like to have. 
> 
> 

Amici:

My experience with the aluminum radiator from Cambridge is the same.  Looks 
like jewelry.  Works just fine!  Fragile as glass.  It needs better 
(stronger) brackets.  Mine's on the shelf.

Bill Dentinger

<Prev in Thread] Current Thread [Next in Thread>