fot
[Top] [All Lists]

Initial SU setup?

To: <fot@autox.team.net>
Subject: Initial SU setup?
From: "Barr, Scott" <sbarr@mccarty-law.com>
Date: Mon, 15 Sep 2003 09:24:59 -0500
OK, so now that the Spit is on the track I'll have to make it run.  Looking for 
suggestions on a starting place for the carbs.  HS6s running on a 1500 motor I 
purchased for $50 out of some guy's garage -- 7.5:1 compression (when it was 
new, anyway).

The car will presently cough and wheeze its way around the track between 3000 
and 4200 revs.  Won't push beyond 4200.  New points, coil, wires...

Suggestions on an initial setting for the carbs?

<Prev in Thread] Current Thread [Next in Thread>