end play is impotant but also gear bearing clearance if the gear is allowed
to wobble on the shaft it can walk itself right out of the slider. ive seen
it .
Jeff
-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net]On
Behalf Of Fubog1@aol.com
Sent: Tuesday, May 23, 2006 7:20 AM
To: fot@autox.team.net
Subject: Re: [FOT] Help on CR TR4 Tranny---popping out of 3rd gear.
Also the mainshaft gear end float must be to minimum. There's a heck of an
axial load due to the helical gears on/off throttle & excessive end float
can
allow them to develop enough inertia to slam out of mesh, resisted only by
the contact on the dog teeth & the detents.
Glen
|