I've got a set of those myself that I took off a Toyota 2TG motor and
ran for quite a while on my cheater TR3. Pain in the ass to tune, as
I recall the air corrector jets are backwards to Weber practice of
leaning the mix as the number goes higher. Also of course you can't
borrow anything from fellow racers--weber parts don't fit.
As I recall I got all the bits from Mikuni USA, but I finally gave up
on the carbs as too much hassle.
Bill Babcock
billb@bnj.com
bnj Website for Babcock & Jenkins, a direct and interactive agency
You can subscribe to my Blogs
Via email:
All Aluminum Tour: Touring and racing classic North American tracks.
http://www.feedblitz.com/f/?Sub=168395
Ponohouse : Living and playing in Maui. http://www.feedblitz.com/f/?
Sub=168304
or Via RSS
Ponohouse: http://feeds.feedburner.com/PonoHouse
AllAluminumTour: http://feeds.feedburner.com/AllAluminumTour
On Apr 22, 2007, at 11:20 PM, Mark J. Bradakis wrote:
> We've got a fellow here in Salt Lake with a Mikuni clone of a Weber
> DCOE on his MGB. Anyone have a good source of jets for these carbs?
> I've got a zillion Weber bits, some Dellorto, but nothing for Mikunis.
>
> Thanks,
> mjb.
> _______________________________________________
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|