fot
[Top] [All Lists]

Re: [Fot] gapless rings

To: "'Friends of Triumph'" <fot@autox.team.net>
Subject: Re: [Fot] gapless rings
From: "Jack Brooks" <jibjib@att.net>
Date: Fri, 11 May 2007 22:53:27 -0700
Even if they don't stock them, they will take your existing rings and cut
them.  I had the second compression ring from a set of Deves rings cut by
Total Seal 7 or 8 years ago.  Back then it was $5 for set up and $5 for each
ring.  It was no sweat to risk $45 + the cost of the rings.  

While I have not checked my compression or leak down lately, I have had no
problems in my street/AutoX TR3 with BFE's 87mm kit.

Jack

-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Gasket Works USA
Sent: Friday, May 11, 2007 5:38 PM
To: Friends of Triumph; Jim Cun
Subject: Re: [Fot] gapless rings

I didn't know these were available for Triumphs.  
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>