Does anyone know of a ready source for Spitfire headers that will stay
tucked up in the frame? This is for a 1300 and the engine builder says I
should stick with a tri wye design for the prep level of the motor he's
building. The headers available from the sources I've found so far are
apparently for street cars since they hang 1 1/2 to 2 inches below the
frame.
Thanks
Jim Norlin
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|