If the cam is ong duration you probably need at least .015" clearance. I use
.022" intake and .025" exhaust on Peyote.
-----Original Message-----
From: fot-bounces+billb=bnj.com@autox.team.net on behalf of jim hearn
Sent: Fri 8/24/2007 1:30 PM
To: FOT@autox.team.net
Subject: [Fot] Adjusting valves
It has been suggested to me that the valves on my '74 TR6 may need other
than the stock settings since it has a hotter cam. I don't know what the
cam is but it is definitely a hotter cam. I have only had the car a short
time so my primary mission is to make sure there are no extraordinarily
tight or loose valves. May be I could get a feel for the general settings
and take any tight or loose ones to that settings.
[demime 1.01d removed an attachment of type application/ms-tnef which had a
name of winmail.dat]
billb@bnj.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|