The lost attachment to my earlier message says: "remove the spring... and
remove the clips which bind the spring leaves together. Counting the main leaf
as number one, reverse the clips on the leaf. This will involve reversing the
clips on the leaf and grinding flush the convex dimple locatin the rubber
buttons on at the ends of the leaf...." What soes this mean? I have studdied
a stock spring and do not understand the directors. Dale Oesterle
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|