fot
[Top] [All Lists]

Re: [Fot] Rocker stand studs

To: "MadMarx" <tr4racing@googlemail.com>
Subject: Re: [Fot] Rocker stand studs
From: Bill Babcock <Billb@bnj.com>
Date: Mon, 19 May 2008 12:03:48 -0700
I've had them turn loose. I use ARP studs, aircraft nuts, and machined  
flat washers, a little bit of red locktite and nothing comes loose  
anymore. I also use the rocker stands that support the end of the  
rocker shaft.
On May 19, 2008, at 11:57 AM, MadMarx wrote:

> Never heard of this failure on this side of the pond.
> What do you rev, what cam lift you use, what rocker do you use,  
> which valve
> spings?
>
> Maybe too much torgue on the bolts, or not enough torgue?
> Stange thing. I use the old stock bolts and had no failure till now  
> with a
> mileage of about 2000 mls.
>
> Chris
>
> ----- Original Message -----
> From: "Jack W. Drews" <vinttr4@geneseo.net>
> To: <fot@autox.team.net>
> Sent: Monday, May 19, 2008 3:30 PM
> Subject: [Fot] Rocker stand studs
>
>
>> Again this weekend one of our TR competitors suffered valve train
>> damage because the rear rocker stand stud backed all the way out, the
>> shaft broke, and rockers were damaged. The studs appeared to be grade
>> 8 studs, the one that backed out was not damaged, and the threads in
>> the head were not damaged. On this particular engine, the rocker
>> shaft stands were steel and were in as-new condition.
>>
>> I've seen multiple occurrences of two failure modes -- one is
>> breaking the end studs, the other is studs backing out. Both
>> resulting in collateral damage.
>>
>> What is the collective wisdom of the list regarding
>>
>> ---prevention of breaking?
>>
>> ---prevention of backing out?
>>
>>
>>
>> uncle jack
>> _______________________________________________
>> http://www.team.net/donate.html
>>
>> Fot mailing list
>> Fot@autox.team.net
>> http://autox.team.net/mailman/listinfo/fot
>>
>> You are subscribed as tr4racing@googlemail.com
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> You are subscribed as billb@bnj.com

Bill Babcock
Babcock & Jenkins
Billb@bnj.com
503.936.7660
www.bnj.com
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot


<Prev in Thread] Current Thread [Next in Thread>