Thanks All
I reduced fuel pump pressure to something less than 3 1/2 psi and the
leaking stopped. The float needle valves are stock not grose jets.
The fuel pressure regulator is a holley with an adjusting stud. What
fuel pressure regulators do you guys recommend? The fuel pressure
regulator wasn't as adjustable as I expected it to be with a range of ~
3 1/2 to 6 psi.
Removed, polished (very little)the main needles and the vacuum pistons
now drop freely.
Thanks all for the help
Glenn Franco
72 spit racer on to carb synchronizing.
RACER BUD wrote:
> That's something i didn't know..most people go to the gross jets to
> alleviate sticking
> thanks
> Racer Bud..spitfire #21
> ----- Original Message ----- From: "Tony Drews" <tony@tonydrews.com>
> To: "Glenn Franco" <gaf3@charter.net>
> Cc: "Triumph" <fot@autox.team.net>
> Sent: Sunday, November 02, 2008 11:55 AM
> Subject: Re: [Fot] Was Weber carbs now SU Questions
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|