fot
[Top] [All Lists]

[Fot] Weber DCOE 45's on TR4

To: "FOT" <fot@autox.team.net>
Subject: [Fot] Weber DCOE 45's on TR4
From: "Peter Vucinic" <pvucinic@netspace.net.au>
Date: Fri, 2 Jan 2009 12:38:15 +1100
Dear Lister's,

 

I am seeking those people who have had experience with 45mm WEBER DCOE's
fitted to TR3/4 engines.

 

Specifically those that have modified the progression circuit holes to
remove problems such as 'stumbling/hesitation' and having to run excessively
RICH idle jets to overcome 'stumbling/hesitation'. I suspect this issue will
more relevant to those of us who run road cars, rather than race. But it is
as equally relevant to those who race. It appears that the problem is found
with those of us running modern DCOE 152's with 78 Degree throttle plates.
But not limited to this model. DCOE 152's have three progression holes that
are all position FORWARD of the throttle plate.

 

When you look at the throttle plate position (remove progression hole plug
in top of carb), it is behind the first progression hole and NOT directly
over the plate. This means that when acceleration begins, the top of the
throttle plate, moves forward towards the ram tube/air cleaner side. The
throttle plate then covers the first progression hole as the throttle plate
moves forward.

 

My question is, has anyone drilled other progression hole(s) so that it/they
are positioned directly above the throttle plate?

I suspect the 'period' DCOE9's will have different progression holes and or
positions.

 

 

Kind Regards

Peter Vucinic

TR-4 
Fot mailing list

 <mailto:Fot@autox.team.net> Fot@autox.team.net

 <http://autox.team.net/mailman/listinfo/fot>
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>