> In doing so, I realized that the rear shackle was easy to detach but
> the spring won't come off of the front attachment pin. According to
> the FOT link below, it's clear that these are a notorious pain.
> See link:
> http://www.team.net/mharc/archives/html/fot/2003-12/msg00177.html
I posted the e-mail to which you linked.
The pickle-fork-as-a-lever method did indeed work, after I did these two
things:
1. I found that the pin was stuck because it was bent. The car must have been
in an accident that bent the part of the pin that goes inside the leaf spring,
This prevented the pin from moving inward after about 1/2 inch or so.
Unfortunately, a little of the bent part was already in the frame bushing. I
cut the exposed portion of the pin even with the bushing with a Sawzall to
alleviate this problem.
2. I borrowed an oxy-acetylene torch from work.
I enlisted a friend to help me. We took turns spraying the pin with Aerokroil,
swearing, beating on the pickle fork end with a BFH, swearing, and heating the
frame.
The pin came out.
Good luck with yours and Happy New Year!
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|